G100-12A Lead-acid Charger for 12V Pb-Acid/AGM/GEL/VRLA/WET battery

G100-12A（13.8V 5.0A）Pb-Acid Battery Charger
Item	Specification	Remark
1.Input
Rating input voltage	100~240Vac 50/60Hz
Input voltage range	90~264Vac
Rating input current	1.5Arms	Input:100V Output:Full load
Max input power	100W	Input:100V Output:Full load
2.Output
No load output voltage	DC 2.75V	Detection of battery voltage > 3.2V to start charging
Output voltage range	DC10.0~14.7V
Suit with battery type	12V Pb-Acid battery
Charging current	5.0A ±10%
Charging voltage	DC14.7V ±0.3V	When the battery is vulcanized, the voltage rises to 18V to repair the battery
Floating charge voltage	DC13.2-13.8V
Charge-end current	≤0.8A±0.2A
Timer	5hours
Max output power	73.5W
Ripple voltage	≤150mV	Full load
Power LED	Red	Power on
Charging LED	All off	No battery
	All on	Full charge
	All flash	Error
	Flashing one by one	Charging
Shorted	Yes
Reversed	Yes
Efficiency	≥83%	Full load @220V
3.Environment
Operate temperature	-10 ~ +40℃
Operate humidity	< +90%	Relative humidity
Storage temperature	-40 ~ +70℃
Storage humidity	0 ~ +95%	Relative humidity
Cooling	Natural
Vibration resistance	5MM/50HZ/600S	Non-operating condition
Impact resistance	1 meter drop test 3 times	Non-operating condition
4.Mechanical
Weight	400g
Size	175X72X40MM	Casing only
Connector	Refer to order
5.Safety
Max. temperature rise	< 40℃ on casing
Safety approval	CE/cTUVus/CCC/PSE
MTBF	30000H
ESD	8.0KV
Hi-Pot Insulation	i/p to o/p: 3000V (1 min)