G60-12A Lead-acid Charger for 12V Pb-Acid/AGM/GEL/VRLA/WET battery

G60-12A (13.8V 3.3A） Pb-Acid Battery Charger
Item	Specification	Remark
1.Input
Rating input voltage	100~240Vac 50/60Hz
Input voltage range	90~264Vac
Rating input current	1.0Arms	Input:100V Output:Full load
Max input power	60W	Input:100V Output:Full load
2.Output
No load output voltage	DC 2.37V	Detection of battery voltage > 3V , start charging
Output voltage range	DC10.0~14.7V
Suit with battery type	12V Pb-Acid battery
Charging current	3.3A ±10%
Charging voltage	DC14.7V ±0.3V	When the battery is vulcanized, the voltage rises to 18V to repair the battery
Floating charge voltage	DC13.2-13.8V
Charge-end current	≤0.6A±10%
Timer	>14V,Enter floating charge after 3 hours
Max output power	48.51W
Ripple voltage	≤147mV	Full load
Power LED	Red	Power on
Charging LED	All off	No battery
	All on	Finished
	All flashing	Error
	Flashing one by one	Charging
Shorted	Yes
Reversed	Yes
Efficiency	≥82%	Full load @220V
3.Environment
Operate temperature	-10 ~ +40℃
Operate humidity	< +90%	Relative humidity
Storage temperature	-40 ~ +70℃
Storage humidity	0 ~ +95%	Relative humidity
Cooling	Natural
Vibration resistance	5MM/50HZ/600S	Non-operating condition
Impact resistance	1 meter drop test 3 times	Non-operating condition
4.Mechanical
Weight	270g
Size	127X67X38MM	Casing only
Connector	Refer to order
5.Safety
Max. temperature rise	< 40℃ on casing
Safety approval	CE/cTUVus/PSE/CCC
MTBF	30000H
ESD	8.0KV
Hi-Pot Insulation	i/p to o/p: 3000V (1 min)