G300-168170 Lithium Smart Charger for 4Cells 14.8V Li-ion Battery

MODEL

G300-168170

OUTPUT

Charge voltage  

16.8V±1%

Charge voltage range

10.0-16.8V

Charge current

17.0A±7%

Pre-charge current 

3.4A±7%

Charge-end current

≤1.7A ±10%

Rated power

285.6W

Recommended battery capacity Note.3

40 - 150Ah

Leakage current from battery (Typ.)

≤1mA

CHARGING LED

Red LED flashing

2Hz  Error

Green LED flashing

0.45Hz  No battery；

0.83Hz  ＜25% Capacity；
1.25Hz  ≥25% Capacity；          

1.66Hz  ≥50% Capacity；
2.5Hz   ≥75% Capacity；              

Green LED on

Full

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 98@Full load，Input:115VAC   ；PF>0. 94 @Full load，Input:230VAC  

Input current (Typ.)

4.5A@100VAC        

Inrush current  (Typ.)

Cold start 75A @230VAC

Standby input power

< 1W

Efficiency (Typ.)

95%

PROTECTION

Short circuit Note.5

Protection type : Shut down output

Over voltage

Protection type : Shut down output

Reverse polarity

Protection type : Shut down output

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature ,humidity

-40 - +70℃, 0- 95% RH

Cooling

Natural convection

Vibration resistance

10-50Hz,2G10min.1cycle,60min.eachalongX,Y,Zaxes

SAFETY&EMC(Note. 6)

Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety approval

CB/CE/FCC/CCC/cTUVus

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032   FCC   PART15

Class B

Radiated

EN55032   FCC   PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

220*105*43mm (L*W*H)

Weight

1300g

NOTE

1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details.
2. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
3. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
4. 4.Derating may be needed under low input voltages. Please check the derating curve for more details.
5. 5.This protection mechanism is specified for the case the short circuit occurs after the charger is turned on.
6. 6.The battery charger is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives.