中文 |ENGLISH
battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

G600-147340 Lead-acid Charger for 12V Pb-Acid/AGM/GEL/VRLA/WET battery

  • Specification
  • Input: 100~240V
  • Output: 14.7V 34.0A
  • Charge Process: CCã€CV(H) and Pulse-Floating（Three stages）
  • Charger Indicator: Digital LCD display voltage，current and charging process
  • Output Protections: OVPã€OCPã€OTPã€Shortedã€Reversed
  • Safety Approval: CE cTUVus CB
  • Size: 240X117X66MM/1.5Kg
  • Industry: Power Toolsã€Security System
G600-147340 Lead-acid Charger for 12V Pb-Acid/AGM/GEL/VRLA/WET battery

SPECIFICATION（Lead-Acid battery charger）​

MODEL

G600-147340

OUTPUT

Charge voltage​ (High voltage)  

14.7V±1%

Charge voltage range

10-14.7V

Float charge（Low voltage）

13.8V±1%

Charge current

34.0A±10%

Charge-end current

≤7A ±20%

Rated power

499.8W

Recommended

battery capacity Note.3

60 - 200Ah

Leakage current from battery (Typ.)

≤1mA

CHARGE INDICATOR

LCD display

Display voltage(Display error ± 2%), current(Display error ± 6%), capacity 

COMMUNICATION FUNCTION

USB /CAN/485 Note.1

The battery type (Lead acid, Lithium battery,LiFePO4 battery), charging voltage and charging current can be set by USB interface,  Communication with external devices via CAN or RS485.

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 98@AC100V,Full load

Input current (Typ.)

6.8A@100VAC

Inrush current  (Typ.)

Cold start75A @230VAC

Standby input power

< 2.5W

Efficiency (Typ.)

90%

PROTECTION

Short circuit Note.5

Protection type : Shut down output

Over voltage

>15.5V*N

Reverse polarity

By internal relay

Over temperature

Shut down output, recovers automatically after temperature goes down

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature, humidity

-40 - +70℃, 0- 95% RH

Cooling

Fan convection

Vibration resistance

10-50Hz,2G10min.1cycle,60min.eachalongX,Y,Zaxes

SAFETY&EMC(Note.6)

Max.temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368-1

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032   FCC   PART15

Class B

Radiated

EN55032   FCC   â€‹PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

240*117*66mm (L*W*H)

Weight

1500g

NOTE
  1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details.
  2. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  3. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
  4. 4.Derating may be needed under low input voltages. Please check the derating curve for more details.
  5. 5.This protection mechanism is specified for the case the short circuit occurs after the charger is turned on.
  6. 6.The battery charger is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to "EM I testing of component power supplies."

​​

​

Top