battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

GaN065-050060 GaN Power Adapter, Suit for consumer electronics

  • Specification
  • Input: 100~240V
  • Output: 5.0V 6.0A
  • Charge Process:
  • Charger Indicator:
  • Output Protections: OVPã€OCPã€Shorted
  • Safety Approval: CE
  • Size: 75X43X28.5MM /120g
  • Industry: Consumer electronics products
GaN065-050060 GaN Power Adapter, Suit for consumer electronics

SPECIFICATION

MODEL

GaN065-050060

OUTPUT

Voltage  

5V±5%

current

0-6A

Rated power

30W

Voltage regulation

1%

Load regulation

5%

Start-up time

1000mS(Input:115VAC  Output:Full load)

Rise time

30mS (Input:115VAC  Output:Full load)

Hold time

15mS (Input:115VAC  Output:Full load)

Ripple voltage

≤Vo*1%

 (20MHz ,AC coupling mode, connected in parallel with 0.1uf ceramic capacitor and 47uf electrolytic capacitor)

LED display

Red LED

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltagerange       Note.2

90 - 264VAC

Power factor (Typ.)

PF>0. 55  @AC100V,Full load

Input current (Typ.)

1.2A@100VAC     

Inrush current  (Typ.)

75A/230VAC (cold start)

Standby input power

<0.5W

Efficiency (Typ.)

91%

PROTECTION

Short circuit             

 Yes

Over voltage

Yes

Over current

Yes

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storagetemperature,humidity

-40 - +70℃, 0 - 95% RH

Cooling

 Natural convection

Vibration resistance

10-50Hz,2G10min.1cycle,60min.eachalongX,Y,Zaxes

SAFETY&EMC(Note.3)

 Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368-1

EMC Emission

Parameter

standard

Test Level I Note

Conducted

EN55032FCCPART15

Class B

Radiated

EN55032FCCPART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2,EN61000-4-3,EN61000-4-4,EN61000-4-5,EN61000-4-6,EN61000-4-8,EN61000-4-11

OTHERS

MTBF

30000H

Dimension

75*43*28.5mm (L*W*H)

Weight

120g

NOTE

1.All parameters NOT specially mentioned are measured at 230VAC  input, rated load and 25℃of  ambient  temperature.

2.Deratingmay be needed under low inpu t voltages.Please check  the derating curve for more details.

3.The power unit is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives.

 4.AC Inlet is ICE320-C8, DC cord is 1.5m 2*AWG18 wires, DC terminal is defined when order.

 

 

Top