GaN085-190043 GaN Power Adapter, Suit for Computer 、Consumer electronics

MODEL

GaN085-190043

OUTPUT

Voltage  

19V±5%

current

0-4.3A

Rated power

81.7W

Voltage regulation

1%

Load regulation

5%

Start-up time

1000mS(Input:115VAC  Output:Full load)

Rise time

30mS (Input:115VAC  Output:Full load)

Hold time

15mS (Input:115VAC  Output:Full load)

Ripple voltage

≤Vo*1%

 (20MHz ，AC coupling mode, connected in parallel with 0.1uf ceramic capacitor and 47uf electrolytic capacitor)

LED display

Red LED

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range      Note.2

90 - 264VAC

Power factor (Typ.)

PF>0. 55  @AC100V,Full load

Input current (Typ.)

1.5A@100VAC     

Inrush current  (Typ.)

75A/230VAC (cold start)

Standby input power

<0.5W

Efficiency (Typ.)

93.5%

PROTECTION

Short circuit             

 Yes

Over voltage

Yes

Over current

Yes

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature, humidity

-40 - +70℃, 0 - 95% RH

Cooling

 Natural convection

Vibration resistance

10-50Hz,2G10min.1cycle,60min.eachalongX,Y,Zaxes

SAFETY&EMC

(Note.3)

Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368-1

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032FCCPART15

Class B

Radiated

EN55032FCCPART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

114*68.4*29mm(L*W*H)

Weight

250g

NOTE

1. 1.All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25℃  of ambient temperature.
2. 2.Derating may be needed under low in put voltages. Please check the derating curve for more details.
3. 3.The power unit is considered as an independent unit, but  the final equipment still need  to re-confirm  that  the  whole system complies with the EMC directives.
4. 4. AC Inlet is ICE320-C8, DC cord is 1.5m 2*AWG18 wires, DC terminal is defined when order.