GaN085-288028 GaN LiFePO4 Charger for 8Cells 25.6V Li-Fe Battery

MODEL

GaN085-288028

OUTPUT

Charge voltage  

28.8V±1%

Charge voltage range

20-28.8V

Charge current

2.8A±10%

Pre-charge current 

-

Charge-end current

≤0.28A ±20%

Rated power

80.64W

Recommended battery

capacity  Note.3

3 - 20Ah

Leakage current from battery (Typ.)

≤2mA

CHARGE INDICATOR

LED indication

Red: Charging.   Green: Full or Idle

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range  Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 55@AC100V, full load

Input current (Typ.)

1.5A@100VAC

Inrush current  (Typ.)

Cold start 75A @230VAC

Standby input power

<1W

Efficiency (Typ.)

93%

PROTECTION

Short circuit             

 Yes

Over voltage

Yes

Reverse polarity

Yes

Over temperature

-

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature,humidity

-40 - +70℃, 0 - 95% RH

Cooling

Natural   convection

Vibration resistance

10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes

SAFETY&EMC

(Note.6)

Max. temperature rise

< 40℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368-1

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032   FCC PART15

Class B

Radiated

EN55032   FCC PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

114*68.4*29mm(L*W*H)

Weight

250g

NOTE

1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details.
2. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
3. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
4. 4.Derating  may be needed under low input voltages. Please check the derating curve for more details.
5. 5.This protection mechanism  is  specified for the case the short circuit occurs after the charger is turned on.
6. 6.The battery charger  is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives.
7. 7.AC Inlet  is ICE320-C8, DC cord  is 1.5m 2*18AWG wires, DC terminal is defined when order.