中文 |ENGLISH
battery charger, car battery charger, lead acid battery charger, lipo charger, li-ion battery charger, nimh battery charger

WP800-360210 waterproof charger for 10Cells 32V Li-Fe Battery

  • Specification
  • Input: 100~240V
  • Output: 36V21A
  • Charge Process: Pre-charge、CC、CV and cut-off（Four stages）
  • Charger Indicator: Tri-color LED(Red: Charging＜80%;Yellow: Charging＞80%;Green: Full charge)
  • Output Protections: OVP、OCP、OTP 、Shorted and Reversed
  • Safety Approval: CE
  • Size: 288X129.5X81.7MM/3.5Kg
  • Industry: Golf carts/ Buggy/Utility EV
WP800-360210 waterproof charger for 10Cells 32V Li-Fe Battery

SPECIFICATION(Li-Fe battery charger)

MODEL

WP800-360210

OUTPUT

Charge voltage  

36.0V±1%

Charge voltage range

25-36.0V

Charge current

200-240VAC

21A±10%

100-120VAC

16A±10%

Pre-charge current 

4.2A±10%

Charge-end current  

≤2.1A ±20%

Rated power

200-240VAC

756W

100-120VAC

576W

Recommended battery capacity

 Note.3

30 - 100Ah

Leakage current from battery (Typ.)

≤1mA

CHARGE INDICATOR

LED

Red： battery capacity is less than 80%.  

Yellow： battery capacity is greater than 80%.

Green：standby  or battery is full

INPUT

Rated input voltage

100 - 240VAC  50 / 60Hz

Input voltage range    Note.4

90 - 264VAC

Power factor (Typ.)

PF>0. 96  @full load

Input current (Typ.)

6.8A@100VAC

Inrush current  (Typ.)

Cold start 75A @230VAC

Standby input power

< 2.5W

Efficiency (Typ.)

93%

PROTECTION

Short circuit             Note.5

Protection type : Shut down output

Over voltage          

>3.7V*N

Reverse polarity

By internal relay

Over temperature

Shut down output, recovers automatically after temperature goes down

ENVIRONMENT

Working temperature

-10 - +40℃ (Refer to " Derating Curve")

Working humidity

0 - 90% RH

Storage temperature, humidity

-40 - +70℃, 0 - 95% RH

Cooling

Fan convection

Vibration resistance

10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes

SAFETY& EMC (Note.6)

 Max. temperature rise

< 30℃ on casing

Hi-Pot Insulation

i/p to o/p: 3000V (1 min)

Safety standards

IEC62368

EMC Emission

Parameter

Standard

Test Level I Note

Conducted

EN55032   FCC PART15

Class B

Radiated

EN55032   FCC PART15

Class B

Harmonic Current

EN61000-3-2

.....

Voltage Flicker

EN61000-3-3

.....

EMC IMMUNITY

EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11

OTHERS

MTBF

30000H

Dimension

288*129.5*81.7mm (L*W*H)

Weight

3500g

NOTE
  1. 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details.
  2. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  3. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation.
  4. 4.Derating may be needed under low input voltages. Please check the derating curve for more details.
  5. 5.This protection mechanism is specified for the case the short circuit occurs after the charger is turned on.
  6. 6.The battery charger is considered as an independent unit, but  the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to "EM I testing of component power supplies."
Top