| MODEL | GaN085-126060 |
| OUTPUT | Charge voltage | 12.6V±1% |
| Charge voltage range | 7.5-12.6V |
| Charge current | 6.0A±10% |
| Pre-charge current | 1.2A±10% |
| Charge-end current | ≤0.6A ±20% |
| Rated power | 75.6W |
| Recommended battery capacity Note.3 | 6 - 50Ah |
| Leakage current from battery (Typ.) | ≤2mA |
| CHARGE INDICATOR | LED indication | LED1 on:25% Capacity； LED1 - LED2 on: 50% Capacity； LED1 – LED3 on: 75% Capacity； LED1 – LED4 on: 100% Capacity； LED1 – LED4 flashing : error |
| INPUT | Rated input voltage | 100 - 240VAC 50 / 60Hz |
| Input voltage range Note.4 | 90 - 264VAC |
| Power factor (Typ.) | PF>0. 55@AC100V, full load |
| Input current (Typ.) | 1.7A@100VAC |
| Inrush current (Typ.) | Cold start 75A @230VAC |
| Standby input power | <1W |
| Efficiency (Typ.) | 93% |
| PROTECTION | Short circuit | Yes |
| Over voltage | Yes |
| Reverse polarity | Yes |
| Over temperature | - |
| ENVIRONMENT | Working temperature | -10 - +40℃ (Refer to " Derating Curve") |
| Working humidity | 0 - 90% RH |
| Storage temperature, humidity | -40 - +70℃, 0 - 95% RH |
| Cooling | Natural convection |
| Vibration resistance | 10 - 50Hz, 2G 10min. 1cycle, 60min. each along X, Y, Z axes |
| SAFETY&EMC ( Note.6) | Max. temperature rise | < 40℃ on casing |
| Hi-Pot Insulation | i/p to o/p: 3000V (1 min) |
| Safety approval | CE/PSE/cETLus/ SAA/CB /FCC/UK |
| EMC Emission | Parameter | Standard | Test Level I Note |
| Conducted | EN55032FCCPART15 | Class B |
| Radiated | EN55032FCCPART15 | Class B |
| Harmonic Current | EN61000-3-2 | ..... |
| Voltage Flicker | EN61000-3-3 | ..... |
| EMC IMMUNITY | EN61000-4-2，EN61000-4-3，EN61000-4-4，EN61000-4-5，EN61000-4-6，EN61000-4-8，EN61000-4-11 |
| OTHERS | MTBF | 30000H |
| Dimension | 114*68.4*29mm(L*W*H) |
| Weight | 250g |
| NOTE | 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and Green digital power for details. 2.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 3.This is Green suggested range. Please consult your battery manufacturer for their suggestions about maximum charging current limitation. 4.Derating may be needed under low input voltages. Please check the derating curve for more details. 5.This protection mechanism is specified for the case the short circuit occurs after the charger is turned on. 6.The battery charger is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 7.AC Inlet is ICE320-C8, DC cord is 1.5m 2*18AWG wires, DC terminal is defined when order. |
